Mustangs Plus :: Engine :: Engines :: Smeding Engines :: Smeding Performance 427 Cobra Special 540 Hp/540 Ft. Lbs. Torque

Smeding Performance 427 Cobra Special 540 Hp/540 Ft. Lbs. Torque

Smeding Performance 427 Cobra Special 540 Hp/540 Ft. Lbs. Torque Smeding Performance & Machine
Bookmark and Share

The quick revving 427 Cobra Special is a maximum effort performance engine that’s not for the faint of heart. Because it’s based on a 351 Windsor race block, it is approximately 140 pounds lighter than the older big blocks. From the block to the crank, to the rods, to the induction system, the 427 Cobra Special is built to be an all-conquering powerhouse, yet is still a street engine that runs on 91-octane pump gas. With its lumpy hydraulic roller cam, the exhaust note is one that says “don’t mess with me“, and has the power to back it up. Take a look at all the premium features of this engine and you’ll see this is a real world performance engine that has all the power your kit car or muscle car could want. And don’t forget to take a look at the options list to personalize your 427 Cobra Special. We have everything from dual-quads to Electronic Fuel Injection, to our bright and shiny polish package.

• Individually dyno tested & calibrated with printout
• Very strong exhaust tone
• Requires 2,500+ stall converter
• Minimum vacuum for power brakes
• Accepts mechanical fuel pump
• Requires 91 Octane fuel
• 3 year limited warranty, unlimited mileage 

560 Horsepower 
560 Ft. Lbs of Torque
$10,995 As shown, including 
dyno testing and tuning
 
Smeding 427 Cobra Specifications

Block: Dart with Splayed Cab Four Bolt Mains, C.N.C Machined, 4.125 Bore, Scalloped Water Jackets, One Piece Rear Main Seal 
Crankshaft: 4340 Steel, Light Weight Non-Twist Forging, Micro Polished, and Chamfered, Internal Balance, 4.000” Stroke
Rods: 4340 Steel "H" Beam with 7/16" ARP Cap Bolts, 6.200" Length 
Pistons: LightWeight Forged, Reverse Dome, 10.2 Compression, with Wrist Pin Below Oil Ring 
Rings: Low Friction Single Moly 1/16” x 1/16” x 3/16” 
Camshaft: Custom Ground Hydraulic Roller .544”/.573” lift 238°/248° Duration @.050” 
Rocker Arms: 1.6 Ratio, Full Roller To Reduce Friction 
Intake: Edelbrock Victor Jr. 
Cylinder Heads: Smeding / AFR, 205cc Intake port, Fully C.N.C Ported, 2.08"/1.60" Valves 
Carburetor: Quick Fuel 750, Dual Feed, Double Pumper,Calibrated and Tuned on our Dyno.
Distributor: Hall Effect Electronic, Polished Billet Aluminum Housing 
 
SHIPS TRUCK FREIGHT
Details
Part No. 13517
Mfg. Part No. 427COBRASPECIAL
 
Price: $10,995.95 motor
Options
Quantity

Customer Product Images

No images have been submitted.
Click here to submit your image

Send to friend

: *
: *
: *