Mustangs Plus :: Engine :: Engines :: Smeding Engines :: Smeding Performance 347 Extreme 405 Hp/ 405 Ft. Lbs. Torque

Smeding Performance 347 Extreme 405 Hp/ 405 Ft. Lbs. Torque

Smeding Performance 347 Extreme 405 Hp/ 405 Ft. Lbs. Torque Smeding Performance & Machine
Bookmark and Share

The Smeding Performance 347 Extreme is the smallest of all our stroker engines, yet has more power than some of its bigger brothers and it has became one of our most popular stroker engines. You’d think that a small-block with over 400 horsepower would drive like a high-strung drag race engine wouldn‘t you? Surprise, not so! This very efficient stroker has better drivability and higher vacuum than most lesser powered 302s due to the longer stroke which greatly increases the low rpm torque. With all of our years of experience building strokers we have honed this combination to perfection. All the right parts are mated together to make one of the best, and most easily driveable power combinations available for Ford owners today. With its extremely wide power band, the 347 Extreme works very well in front of stick transmissions, as well as automatics, even ones with overdrive. With loads of options available, like different induction systems, and our polish package, you can personalize your 347 Extreme at will.

• Dyno Tuned and Calibrated with printout
• Medium idle Tone
• Requires 2,000 stall converter
• Works with power brakes
• Requires 91 Octane fuel
• Works well with overdrive
• Accepts mechanical fuel pump 

405 Horsepower 
405 Ft. Lbs of Torque
$8,995 As shown, including 
dyno testing and tuning 
 
Smeding 347 Extreme Specifications

Block: Dart Splayed Cab Four Bolt Mains, C.N.C Machined, 4.000" Bore, Scalloped Water Jackets, One Piece Rear Main Seal 
Crankshaft: Forged Steel with 3.400” Stroke, Micro Polished,Chamfered, Internal Balanced
Rods: 4130 Forged Steel “I” Beam With 3/8" ARP WaveLock Bolts, 5.315" Length, Balanced In Sets. 
Pistons: Forged, 9.7 to 1 compression, Wrist Pin Below Oil Ring 
Rings: Low Friction Single Moly 
Camshaft: Custom Ground Hydraulic Roller .493”/.510” lift 212°/222° Duration @.050” 
Rocker Arms: 1.6 Ratio, Full Roller To Reduce Friction 
Intake: Performer RPM Air Gap, Dual Plane 
Cylinder Heads: Performer RPM 2.02/1.60 Stainless Valves, 170 cc Intake Port, 60cc Chambers 
Carburetor: Quick Fuel 650 Dual Feed, Vacuum Secondary, Electric Choke,Calibrated and tuned on our Dyno.
Distributor: Hall Effect Electronic
Warranty: 3 Year Limited Warranty, Unlimited Mileage
 
SHIPS TRUCK FREIGHT
Details
Part No. 13516
Mfg. Part No. 347EXTREME
 
Price: $8,995.95 motor
Options
Quantity

Customer Product Images

No images have been submitted.
Click here to submit your image

Send to friend

: *
: *
: *