The Vario-Centric Camber Adjuster is a retrofit kit that
adds camber adjustability to your 65-66 Mustangs lower
control arms. This eliminates the need of adding or
removing shims to the upper control arms during
alignment. Slotted weld-on brackets, similar to those
found on the 67-73 models, are provided. They are welded
onto the lower control arm mount and the round hole is
elongated. The camber is then adjusted at the lower
control arm mounting point with the square vario-centric
plates that lock in place when bolted down. These plates
will not move or rotate under heavy loads. Installation
instructions provided.