Mustangs Plus
2010 Catalog

Download Your Copy Today!
Summer 2009
Restomod Magazine

Download and Read Your Copy Today!

Sign up to receive e-mail sales, promotions, e-newsletter, and much more!
For Email Marketing you can trust 
Bulletin Board
    From time to time our customers and others wander into our store with Mustangs or parts to sell, or they're just looking for that Mustang of their dreams.  We post these on our bulletin board, and now we're bringing our bulletin board to the rest of the world.
     If you would like your post included on the Bulletin Board, please fill out the form at the bottom of the page.

Please note:
  • These listings are provided as a service to the Mustang community only.
  • These are all private party listings, and not affiliated with Mustangs Plus.
  • We neither have nor can supply any additional information other than that provided by the parties posting the notices.
  • All transactions, negotiations, and other circumstances of these items are between you and the aforementioned private parties.
  • Mustangs Plus recommends that you always use the appropriate care and caution when dealing with long distance transactions between private parties

    Mustangs Plus neither offers nor implies any guarantees or warranty's of any kind or fashion on any items posted for sale on this page!

Posted on 25 Oct 2011

Looking for advice - My son and I just acquired a great '66 coupe with 289 and 4-speed. Prior owner put some great looking 17" American Racing 5 spokes on it - gave it a really great stance. The downside is tire rub up front and bottoming out in back. Except for traction bars in the back, the coils, leaf springs and shocks look stock. Short of changing the wheels, what will eliminate the tire rub??

Contact Mike Hart -

Posted on 22 Oct 2011

Please check out our web site:
We are a new Mustang Association and growing. Joining is free. We started in Sacramento but have members all over California. Everyone is welcome!

Contact Frank Riley -

Posted on 18 Oct 2011

For Sale: 2012 Mustang GT 19x8.5 5 Spoke wheels (only), 81 miles on them $399 for set; Pull off 2012 GT Strut Tower Brace $55; 2012 5.0 Intake $150; 2012 5.0 intake cover $65. Buy pays shipping

Contact Jamie -

Posted on 17 Oct 2011

Wanted: Original rear window for 67 Mustang white convertible top. Dont need the top, but will consider purchasing as well.

Contact Martha -

Posted on 30 Sep 2011

For Sale: I have a 4-speed Toploader For Sale. It came out of my 1968 coupe. It comes with a Hurst shifter and bell housing. Make me an offer I can't refuse.
Phone 831-462-5416.

Contact Daniel Mensinger -

Posted on 29 Sep 2011

Wanted: looking 4 a 390 long block motor?

Contact tommy -

Posted on 13 Sep 2011

For Sale: Radiator: '66 Mustang. Bought new, installed~uninstalled.....(decided to rebuild the original). Some fins have been bumped in the install/uninstall job....Asking $150

Contact Kathi -

Posted on 05 Sep 2011

For Sale: Set of 4 Torque Thrust D's. 16x8 with tires. The tires and wheels are basically new. Tried to fit them on my 66 coupe, and found them just too big. I have maybe 200 miles on them. The wheels are not chrome, they are the painted ones. I purchased them from Mustangs Plus a few years ago. The tires are Ryken Raptor 225/50zr. One tire had rubbed, and just has minor scrapes. I am asking 1200 or best offer. 209-988-2194

Contact Thad -

Posted on 04 Sep 2011

For Sale: 1965 black mustang, runs great, needs some interior work which we have some, and body in good condition only had scratch down driver side door. asking 10,000 or best offer. for pics please email or call/text 209-609-0234 thanks :)

Contact cristina holcomb -

Posted on 24 Aug 2011

Wanted: Hello,
We are looking for a original California Special 67-68...
We would love to own and care for one... Thank you!
925/846-0629 home# live in Nor cal

Contact olivia baeza -

Posted on 23 Aug 2011

Wanted: Looking for 65 Falcon used Parts, Conv. front Seats, Grill in good shape. Or even Possible donor car.

Contact Vince -

Posted on 19 Aug 2011

For Sale: '65- '66 Mustang Fast Back Parts call 530-432-1663
65/66 orig FAST BACK REAR WINDOW, orig Hurst t shift handle,orig 302 timing cover reconditioned, MARCELLl fog lamps (one lens broken, floor mats new, heater blower, hot lap timer, Rebco tire temp gage, mallory ignition system, 3 stereos w/cassets two mustang radio bessels, SPEAKERS, '65 oig disc break peddal pad, NEW PERFORMANCE CAM FOR 302, and lots more ONE TRIP TO AUBURN ONE PRICE FOR ALL WILL NOT SELL SEPERATLY A GREAT DEAL $750.00 CAN EMAIL PHOTOS

Contact todd humphrey -

Posted on 19 Aug 2011

For Sale: 1968 Shelby GT 500 Convertible Tribute $37,750 (over $60,000 invested) call 530-432-1663

Car presented to Carroll Shelby as "Tribute to Shelby" Photos of Carroll viewing and signing car memorabilia included. San Jose, California production, automatic, power steering, disc brakes, 14k miles since restoration. Body off restoration to Shelby body recreation, new suspension Shelby GT500 specs including lower front A arms, Shelby roll bar, custom interior Robbins convertible power top, new paint original Ford '68 Acapulco Blue, Ten Spokes w/BFG comp T/A and more. (photos, receipts, books Manuals included) New 302 engine and transmission build to GT 350 specs using Ford Motorsport Parts.

Contact Todd Humphrey -

Posted on 10 Aug 2011

Long story short; looking for suggestions on restoration company or individual for a 72 Mustang Mach I, standard trans, 351C (engine out of car)- needs overhaul; car running when engine was taken out. It was going to be replaced with a Windsor, nver completed. Body in good shape, paint faded, tires dry-rotted. Interior in good shape, louvers on back window. Car has been sitting for 20 yrs. Ballpark figure on restoration (without looking at it, I know); sentimental - first car, but is it realistic. Located in Kingman, AZ

Contact Stephanie -

Posted on 09 Aug 2011

For Sale: 65-67 Mustang spoke hubcaps 14in.. Blue center knock off stlye center caps... good condition $250 firm

Contact mike -

Posted on 09 Aug 2011

Wanted: I need a toploader trans , 28 spline , wide ratio. for a 65' mustang. jc...

Contact John e. coath -

Posted on 07 Jul 2011

For Sale: I have an original autolite gt gas cap for sale from a 67 mustang gt asking 300 obo good condition

Contact Steven -

Posted on 27 Jun 2011

For Sale: Edelbrock aluminum rpm heads complete ready to go
part # 60259 with202 valves matching polished rpm manifold,
competition high energy cam 510 lift 280 duration, lifters,canton deep sump oil pan with windage tray, complete arp bolt kit for 289/ 302 ford racing polished chrome 3 inch tall valve covers
Trw pistons plus much more everything but heads brand new in box. Heads slightly used but are in excellent shape traded my 66 mustang for work on my house so selling all my goodies.
Sacrifice 2000

Contact Nick -

Posted on 20 Jun 2011

For Sale: I have a 1969 or 1970 351 engine. It was rebuilt years ago and has been sitting ever since. (maybe ten years or more) It is on a stand. It comes with the heads, intake manifold, distributor, oil pan, valve covers w new gaskets. It needs the intake bolted into place, a carb, freeze plugs. The block numbers I see are C90E-6015-B and the intake numbers I see are C90E-6015-8. I can't find any numbers on the heads. I'm in Ventura CA *805* 890* 9809* Paul

Contact Paul Meehan -

Posted on 19 Jun 2011

For Sale: i have a 289 engine for sale, came from 67 mustang.. was going to use for project but bought instead of rebuild.. was a factory boar BUT had block rebuilt and heads (matching) all redone with newparts hardened seats, the whole 9 yards ready to drop.. i have 2500.00 into engine all recipts to go along.. these are rare. dean 360-606-9116

Contact dean -

Posted on 18 Jun 2011

Wanted: Looking for 70 fastback no motor project car

Contact Scott -

Posted on 15 Jun 2011

For Sale: 74 Pinstang ( Pinto hatchback ) More mustang than Pinto. Great project car for someone. Had 351C /C-4 installed with headers and is still set up for V-8. 8" Differential .Some rust , good shape for the age. Have Hooker's Small block conversion headers brand new ,still in plastic. Just looking for good home,please make offer.

Contact Tony Sarganis -

Posted on 20 May 2011

Wanted: Looking to buy 87-90 hatchback mustang roller with no engine or trans.. Have built 4.6 im going to install. looking to pay around $1000.00 Please email if you have anything Thanks

Contact Jason Winters -

Posted on 27 Apr 2011

For Sale: i have a stock shelby cobra 9000 tach for sale in top condition all chrome with a chrome stock mount
i will let it go for 300.00 with free shipping please contact me at 510-375-6964 thanks james

Contact james mangrum -

Posted on 24 Apr 2011

Wanted: looking for a '64 1/2, '65' or '66 automatic in good condition that can be used as a daily driver at a reasonable price. If you have something available, please send info and photos to my e-mail. Thank you.

Contact Aaron -

Posted on 11 Apr 2011

For Sale: Just updated my 67 to all disk brakes, selling front and rear drums including hardware. Good offer if you are working on a project car and would like to keep it original. Also have converter and flywheel for C4 transmission. Make me an offer..

Contact Joe -

Posted on 08 Apr 2011

Wanted: 65-67 fastback 4spd.

Contact Bob -

Posted on 08 Apr 2011

Wanted: im looking for a good carb for a 66 with the 200 ci automatic..... as the economy has me down.... hopfully a good one can be found reasonably.... the car is wifes birthday present if it can be done in time... thanks for any leads !!!

Contact chris blessing -

Posted on 07 Apr 2011

Wanted: My kids are now grown and I can get back into my hobby again. Sold all my Mustangs years ago to raise a family. I am looking for a '65/'66 Mustang convertible. Project cars, drivers, restored original and restomods all considered. Shopping throughout USA right now to find the right buy before the end of April or early May. Email me a few photos and specs at if you have one to sell. Thanks! Chris

Contact Chris Floyd -

Posted on 06 Apr 2011

Wanted: hi my names vince and im looking to buy an 87-95 5.0 mustang no convertables 1500$ please call/text me at 209-470-5247

Contact vincent -

Posted on 04 Apr 2011


Contact JOE ORTEGA -

Posted on 29 Mar 2011

For Sale: have 3 sp floor clutch for 65 mustang. Yes all the parts come along with this. Make me an offer.

Contact julie -

Posted on 27 Mar 2011

For Sale: Ansen Sprint wheels. one 14 x 7 (with a very used tire), two 14 x 8 (one with a new Winston 60 tire, the other with a bald tire). The 14 x 7 has a small scrape on the lip, the other two are in almost new condition. $150 for all 3. Also, have one 15 x 8 solid centerline, in good condition. $50. All are 5 x 4 1/2, off of 1970 Mustang. For sale or trade for ???
In Ventura, CA.

Contact Rick -

Contact Rick -

Posted on 25 Mar 2011

Wanted: 65 fastback drip rail molding. ome not the repo stuff.

Contact Jim -

Posted on 20 Mar 2011

Wanted: 5.0 engine with AOD for early Mustang transplant. Prefer good condition running package. Call Tom, 503 757 6625

Contact Tom Mc Nulty -

Posted on 18 Mar 2011

Hey all old newbie here. drove and kept on the road a 66 coupe back in 82 also had a 70 cobra 302, have been doing the kids/wife thing since 88. so you see where this is going. WELL, I dove back in. found a 72 ragtop in fair/good condition. needs work but I think I can handle. I never replaced a brake power booster and suggestions or a piece of cake? This of going electronic with the distributor as well. Anybody add a super coil to this as well? The 302 already has an edlebrock mani and 4 bar. Still diving deeper into this car. More later. Happy to be back running with Pony's. Any help?

thanks Kevin

Contact Kevin -

Posted on 16 Mar 2011

Wanted: 65-68 coupe shell or project car. prefer a 67 coupe to restore. email me for more details please

Contact robert -

Posted on 10 Mar 2011

I've got an MSD Billet Aluminum electronic distributor with mechanical advance for a 302,it also has the hardened steel gear in order to work with late model 302 roller motor.I'm looking to trade/swap for an MSD Billet Aluminum dist with a vac advance.Email me if intrested or call me @(209)589-0613 Thanks

Contact scott -

Posted on 02 Mar 2011

For Sale: I have a 1970 mach 1 for sale! Very solid car to fix up. one repaint is faded, original red car. never restored!.351 Windsor with original shaker hood , FMX automatic tranny runs and drives good interior is clean, no radio, headliner is stitched,door panel has tape on it. no a/c. Numbers match od showing 75,xxx a low mile car!!! the original rim blow steering wheel has no cracks and works. no dents and the lights, wipers and turn signals work. No trades or offers. I am not hurting for money, so contact me ONLY if you have funds to purchase this super rare car . call if you are serious 530*222*8214 this car is located in Redding, Ca 96003===== READ THIS==== only e-mails with contact number will be returned!!!


Contact steve -

Posted on 01 Mar 2011

Wanted: looking for parts car 86 GT also parts for convertible top

Contact scott -

Posted on 05 Feb 2011

Wanted: looking for a used 3' cowl hood for a 66..or a front brake convertion kit ..or a trunk that has a shelbly tail but for a coupe not a fast back
209 898 1652 the names vic thanks

Contact victor hernandez -

Posted on 03 Feb 2011

Wanted: clutch fork from an 86-92 mustang 5 speed
316-516-3642 need asap would also like the clutch fork cover.

Contact Frank Weber -

Posted on 03 Feb 2011

Wanted: Looking for 1965 mustang power steering pump and power brake booster.

Contact Ge -

Posted on 24 Jan 2011

Wanted: 66 coupe trunk lid

Contact Dave -

To request an addition, removal, or update, please fill out the form below.  Private party postings only.   Postings must be automotive related.  For any requests other than bulletin board additions or subtractions, please email


Email Address:

New Posting                      Update Posting                 Remove Posting

Posting: (include price, location, condition, contact information, etc. Plain text only.)